EnviroFry Ozone Generators
Kill Toxic Mold & Household & Pet Odors, plus Decontaminate Buildings from Viruses, Germs, Odors &
Other Biological Health Threats

www.ozonegeneratorkillsmold.com

For more info or to order by phone, please contact Phillip Fry by email
phil@moldinspector.com, or phone toll-free 1-866-300-1616 (USA and Canada)  
or Phillip's cell 1-480-310-7970 worldwide

 Please Read: Does Ozone Kill Mold?

 


http://seal-easternmichigan.bbb.org/seals/blue-seal-200-130-envirofry-90024203.png?nolog=1

EnviroFry

         

                
            
How To Use an Ozone Generator in Your Home, Rental Real Estate, and Workplace

Here are answers to ozone use questions asked of Mold Consultants and Certified Ozone Professionals Phillip and Divine Fry.  You can email your ozone questions to the Fry's at phil@moldinspector.com or phone the Mold Advice Hotline
Toll-Free 1-866-300-1616.  Phillip's personal cell phone number is 1-480-310-7970.

     Q.
Nov. 12, 2013 from Australia. What regular maintenance do they require? How long does it take? How often? And who is able to perform it? Do your machines use mica plates? Does the ozone blasting affect plastic boxes used for storage in the home, or electrical equipment? What preparation needs to be done before running the ozone generator inside the house or inside the car? How often would you suggest running the ozone generator to control dust mites? I have heard that ozone can damage materials such as rubber, electrical wire coatings, and fabrics and art work containing susceptible dyes and pigments. Is this a problem when you are doing ozone shock and if so are their measures you can take to prevent it?
     A. The 18 lb ozone generator (contractor model---the only one with 220/240 electric for Australia) shipping cost via international priority mail is US $127 including $900 for insurance coverage. Contractor model is US $880. The home model is NOT available with 220/240 electricity. Our Bio3Blaster ozone machines use only the highest quality ceramic generator paddles, and not fragile mica or cheap ceramic with a tiny piece of stainless steel mesh glued on them. The ozone producing paddles have nickel-titanium printed on them, electrified to produce the highest volume of ozone possible. Long life ceramic coating: the paddle surfaces are coated with a life extending porous ceramic glaze over the electrified nitinol which reduces the need for frequent cleaning and extend the cell life to nearly 5000 hours!  Nitinol is nickel + titanium + -nol (from Naval Ordnance Laboratory, where it was created and first used in 1968). The ozone-producing parts of the Bio3Blaster are the highest quality available on the market. If you use the generator heavily, every one to two years, you might need to replace the ozone generator paddles that generate the ozone. Only about $40 for two paddles. Takes a screwdriver to replace the paddles.  Our generators are meant to be used day in and day out in heavy duty contractor use by employees (not as careful with equipment as owners). Read the strong warranty posted on our website www.ozonegeneratorkillsmold.com. Ozone generators will not usually harm anything else your home, but as a wise precaution, when we do ozone mold treatment (many times per week for clients across USA), we plastic wrap or cling wrap any electronic items such as computers, laptops, TV equipment, or remove such items from the area(s) being ozoned. As to rubber items such as the sealing gasket on refrigerators and freezers, we tape over the rubber with wide masking tape. There wonít be any damage to plastic boxes. Valuable paintings can be removed from the ozoned area, or plastic or cling wrapped to protect them. When in doubt on an item, remove the item from the area to be ozoned. During the ozone treatment time (usually 8 hours in an area), there can be no people, pets, or live plants in the contained area during the treatment time and for 2 hours afterwards. To control insects, do ozone treatment as often as is necessary to get rid of the pests.  Once a week for 8 hours at a time in each area of yur home for a few weeks works wonders in killing insects. The easiest way to order, especially to add the international shipping cost and insurance, phone me in the States (USA eastern time 8 a.m. to 6 p.m.) at 1-480-310-7970 with your credit card details and any additional q's you may have. In service, Phillip Fry, manager EnviroFry.


    
Q.
October 25, 2013. I live in Brisbane, Australia and I would like to know if your ozone generators are suitable for use in Australia (240Volt). If they are, What would the costs be? Initially? Ongoing? How long would it would be before dispatch once payment is made? What is the expected durability of your machines, what maintenance do they require and who is able to perform it? We have a musty smell in our garage (separate from the house) where items had been moved when my husband was cleaning the house when we had a mould explosion when Brisbane had floods a couple of years ago (we weren't  flooded) and also in a vehicle we've just bought. There is a little mould growing on a table leg in the lounge and some mildew on the ceiling of an external room at the back. If we cleaned the visible mould and used the ozone generator in each room, attic and under the house, would you expect that the problem would be solved? Besides mould, I know that I also react to dust mites, would the ozone generator also kill the dust mites? What about cockroaches and silver fish?
    
A. The contractor model Bio3Blaster ($880 US) is available with 220/240 volt at no extra cost.  You can order the high output (28,000 units of ozone per hour) ozone blaster at www.ozonegeneratorkillsmold.com.The postal fee to send the ozone generator (18 lbs) to Australia by international priority mail will be at least $125. Your ordered ozone generator will be shipped to you within 24 hours of your payment. Expect about 7 to 10 days for postal delivery by international priority mail. High output ozone can kill insects exposed to the ozone gas. High output ozone definitely kills mold spores and mold growth. To Read the 10 steps for safe and effective, do it yourself mold removal, please visit www.moldinspector.com/mold_removal.htm. The machines are very strong and meant for heavy duty use day in and day out by professional mold remediation companies. There is a complete warranty for the first year, and the warranty can be renewed for only US $100 annually. When the ozone blaster has been used for hundreds of hours, you would spend $40 and a few minutes time to replace the parts that generate the ozone.

    
Q. October 12, 2013. Can you use the ozone generator in a room where a gas hot water heater is running?
     
A. Although it still safe to blast high output ozone gas into an area in which a gas furnace or gas hot water heater is operating with a burning gas flame, a lit furnace or hot water heater reduces some ozone and increases flame temp 15%. As a precaution, during all ozone treatments, please turn off gas flame appliances such as a furnace, hot water heater, or gas cooking range.  You can order your ozone generator online at www.ozonegeneratorkillsmold.com or by phoning me weekdays or weekends toll-free 1-866-300-1616. Best wishes, Phillip Fry, Certified Environmental Hygienist

    
Q. Sept. 10, 2013. I recently came across your excellent website www.moldvictimrights.com.  I was exposed to indoor molds and their mycotoxins back in 2008 and became very ill.  Since then I have been trying to avoid additional exposures and to help some of my legal clients who have also been exposed. When I read your description of the Bio3-Blaster it states the ozone levels will destroy even mycotoxins.  How does it actually accomplish this, and do you still need to physically remove the destroyed mycotoxins after the ozone treatment?  Unlike mold spores, it is my understanding that mycotoxins are not living organisms so they cannot be killed, since they were never alive in the first instance. I would be very interested in purchasing a machine prior to recommending one to my mold clients.  Do they come with any kind of a 30-day money back guaranty or the like? Thank you for your time and consideration!---Maryland attorney.
     
A. Dear Maryland Attorney, thank you for your excellent ozone generator questions. The ozone blasters have a very strong one year warranty (which can be renewed after the first year for only $100 annually), but NO money back offer. We recommend that you purchase the contractor model, which is only $880 (including UPS ground delivery) at www.ozonegeneratorkillsmold.com. Mycotoxins are organic material created by living organisms (growing mold colonies) that high output ozone gas kills very effectively. Another, supplemental or alternative mycotoxin stratgegy is to use a professional industrial HEPA air purifier ("air scrubber") for about $1,000 that contains both a large HEPA air filter to remove airborne mold spores and a one inch thick, large activated carbon filter that removes volatile organic compounds such as mycotoxins.  A carbon filter is about $145.  We prefer the Drieaz HEPA 500 model that you can purchase in stock from several Maryland, DC, and Virginia mold remediation equipment and supply dealers. Please also note that high output ozone gas treatment and air scrubbing are two of the 10 recommended mold removal steps explained at our website www.moldinspector.com/mold_removal.htm. As an attorney, you may also be interested in buying and reading our Mold Legal Guide, available for email attachment delivery to you for only $15 from www.moldmart.net. Best wishes, Phillip and Divine Fry, Certified Environmental Hygienists, Certified Mold Inspectors, and Certified Mold Remediators.

    
Q.
Aug. 11, 2013. What about the ozone treatment of these items?
      A.  
1. Old horsehair-stuffed upholstered furniture is ok for ozone gas treatment. 2. If very valuable, remove water and oil paintings prior to ozone treatment. 3. Seal the wifi modem box, tape player, and CD player with clear plastic sheeting or a bag taped tight to the wifi box and tape/C.D. player. 4. Books and papers can be spread out in the space to be ozone treated. The included Ozone Duct Hose is attachable to the special hose connection that is stored inside the ozone generator box.

    
Q. July 24, 2013. Just got back to North Carolina (first visit since last December) and my barn building is a little smelly.  Should I use my ozone generator machine on the 2nd floor of the barn with or without the AC on?  
     
A. Please repeat the ozone treatment EVERYWHERE in your building, for at least 8 hours in each area. Don't run air con during the ozone treatment, but please do use several box fans to move the ozone air both vertically and horizontally because ozone air is heavier than regular air and it will fall to the floor unless you keep the air stirred up. You also should scrub all possessions, walls, and floors with the effective mold remover boric acid powder, available at www.moldmart.net (dissolve one half pound per gallon of hot water).  You should also use the hose attachment of the ozone generator to inject ozone into each window air conditioner air supply duct for at least 2 hours and for eight hours into the return air duct of a centralized air con system. Please also use the hose to do ozone treatment inside your vehicles. If I can be of further help, please email me. Best wishes---Phillip Fry, phil@moldinspector.com  

     Q.   July 18, 2013.Should fans be turned on when running the ozone generator (steps 4 and 10 of your suggested mold remediation protocol and the fogger (step 10)?
    
A. Yes. You need to use multiple box fans to move room air both horizontally and vertically in the room or area being ozone treated. In addition, be sure to leave a window open close to the ozone generator so that adequate fresh air can reach the ozone machine to convert to ozone gas.

     Q.   July 18, 2013. All rooms in my house (a ranch on a slab) are contaminated with mold.  The bedrooms and kitchen are accessed off a great room. Therefore, to retrieve the ozone generator after it has been operated in these rooms will require moving aside the 6 mil plastic for a brief period.  Will this cause recontamination in those rooms?
    
A. No.  Be sure the wear your 3M breathing respirator (P100 rated) when entering the ozone treatment area to move the generatorís location or turn it off.

     Q.  July 18, 2013. Should/can a dehumidifier and the ozone generator be operated at the same time?
    
A. No. Having some humidity in the air can actually help the effectiveness of the ozone generator.

     Q.  July 18, 2013.Should the air scrubbing/vacuum operation be performed immediately after the ozone generator operation has been performed in each room, or after the ozone generator operation has been performed throughout the entire house?
    
A. Just wait until after all areas have been initially treated with ozone as the first mold remediation step.

     Q. December 7, 2012.  I have mold & dry rot in my crawl space of approximately 1950 square feet under my Texas house.  I did not put vent holes in the area and now I have a major problem with dry rot. I am looking at purchasing a BiO3Blaster to try to kill the mold and put new floor joists under the floor.  Can I use regular yellow pine lumber next to the old joists and cut the damaged portion off the old joists & nail the top portion to the new. I will put vents around the outside but do I need anything else beside the BiO3Blaster to stop the mold formation. How long should I run the blaster & should I do it prior to cutting the vent holes?
    
A. your overall crawl space remediation strategy is good.  Run our home model Bio3Blaster ozone generator for eight hours in two different crawl space areas in the middle of the crawl space. For example, put the ozone generator one-third of the way across the crawl space and two-thirds of the way across. You also need to run simultaneously several large box fans to carry the ozone gas to all areas of the crawl space. Improved ventilation of the crawl space is very wise to help prevent future mold and dry rot problems. It is ok to install the ventilation holes now while you are waiting for the delivery of your ordered ozone blaster. The improved ventilation will assure an adequate supply of oxygen to the intake of the ozone generator for it to make lots of ozone gas (14,000 units of ozone production per hour). You can buy the ozone generator at our website where you can read the in depth user manual with safety precautions. Your second step should be to use a small electric sprayer or hand-pumped garden sprayer to spray a wet-coating of the EPA-registered fungicide Tim-Bor on all wood surfaces in the crawl space. Then, and only then, cut out the bad dry rot and mold-infested timbers and install the adjacent new timbers (which you should pre-treated by spraying all sides of each timber with Tim-Bor). Then, do another 8 hours of ozone treatment in two different crawl space areas. Then, spray one more wet coating spraying of Tim-Bor onto all wood materials in your crawl space. You can buy a 25 lb pail of Tim-Bor at our website.  If you have mold remediation follow up questions, please email me or phone me 1-480-310-7970. You can order the ozone generator and Tim-Bor with your debit or credit card over the phone by calling me, or by fax or email, or by using our online shopping cart. Best wishes, Phillip Fry, mold consultant, Certified Environmental Hygienist, Certified Mold Inspector, Certified Mold Remediator, and Certified Ozone Professional.

     Q. Nov. 13, 2012. Here's my problem:  I had an A/C leak in my car, the carpet on the passenger side got quite wet before I discovered it; leak was fixed and I assumed the carpet had dried out so replaced the removable mat on top of it.  Apparently, it needed more drying.  Well, the A/C issue returned to be fixed once again and now I see that there is hard, dried, white mold on this section of carpet.  Will this boric acid formula be effective in removing this dried mold?  I looked into replacing the carpet but as you can imagine, totally cost prohibitive.  Thanks for your input.         

     A. Boric acid powder would be very effective to remove the mold in the car's carpeting.  Mix one pound of boric acid powder into one gallon of hot water to dissolve the boric fully. Use a hand-held scrub brush to scrub the carpeting very thoroughly and at least several times. You should also scrub the car seats upholstery and the entire vehicle's interior (walls, ceiling, etc.) You can buy boric acid powder for delivery to you. After the boric acid treatment, do ozone blasting with a high output ozone generator for at least one hour. You can buy the high ozone output home model or contractor model ozone generator. Once you own your own ozone generator, you can make big money renting it out to others, or providing the ozone blasting yourself, in your area to kill mold, mold odors, and pet odors. If you have more questions, please email me.---Phillip Fry, mold expert, Certified Environmental Hygienist, Certified Mold Inspector, and Certified Mold Remediator.

     Q. Oct. 16, 2012. Thank you so much for the recommended steps to follow.  I had planned on purchasing your ozone generator after reading all of the great testimonies.  After running it as you describe below, do I have to air out the house or stay out for a recommended amount of time?  Also, what about the mold that is probably in my attic?  Does the generator kill mold if it is inside the walls?  Iím just curious.  My mom already has first dibs on using this at their house once I order it and receive it.  One question that Iím curious aboutÖwhy do I have problems with water coming up through my cement versus other people around our area that have a basement home?  Is it because they pour the slabs differently now than they did back when our house was built?  Am I keeping my moisture level at a good percentage (40%)?
    
A. Doing ozone treatment (for at least 4 hours) in the attic would kill attic mold. After ozone treatment, you need to air out the treated air for at least two hours by running one or more fans to exhaust treatment room air to the outdoors through open windows. You can follow up the ozone blasting of the attic with spraying ($40 hand pumped garden sprayer) EPA-registered fungicide Tim-Bor on all attic surfaces including the insulation. You can read about Tim-Bor and buy it at. Ozone gas cannot get into the insides of walls, ceilings, and floors so it cannot kill mold hiding in those areas unless you cut 2 inch holes into each wall and ceiling section to insert the hose attachment from our ozone generator so that gas can get to each separate wall and ceiling cavity.  You can use a moisture meter to determine the wetness of the concrete floor. Each house can vary in its concrete floor's resistance to upward water wicking from the ground below depending on the type of moisture barrier installed beneath the floor, whether it was damaged during installation, and whether the barrier has degraded (typical) over time. Keeping your indoor humidity at 40% is great to help prevent indoor mold growth because the humidity must be 70% or higher to drive mold growth. You can buy your home model ozone generator. If I can be of further help, please email me phil@moldinspector.com. Best wishes, Phillip Fry, mold consultant, Certified Environmental Hygienist, Certified Mold Inspector, Certified Mold Remediator, and Certified Ozone Professional.
 

[Home] [Does Ozone Kill Mold?] [Ozone Kills Bacteria] [Ozone10 Steps Kill Bugs] [Ozone Kills Insects Research] [Ozone Kills Dust Mites Research] [How To Use Ozone Generator] [Ozone Killing Proof] [Ozone Objections] [Hospital Ozone Disinfection] [Enzyme Neutralizes Mold and Bacteria]